Swan 115 vs Swan 43
How do the Swan 115 and Swan 43 compare? Below, their dimensions, displacement, sail area and the standard design ratios side by side, followed by a data-driven summary.
Swan 115 
Swan 43 | Swan 115 | Swan 43 | |
|---|---|---|
| Length overall | 107.7 ft32.84 m | 31.0 ft9.45 m |
| Waterline length | 107.7 ft32.84 m | 31.0 ft9.45 m |
| Beam | 26.6 ft8.12 m | 11.7 ft3.55 m |
| Draft | 11.5 ft3.50 m | 7.2 ft2.20 m |
| Displacement | 203,928 lb92,500 kg | 22,531 lb10,220 kg |
| Ballast | 70,547 lb32,000 kg | 10,400 lb4,717 kg |
| Sail area | 7,025 ft²652.6 m² | 821 ft²76.3 m² |
| SA / Displacement | 32.44 | 16.47 |
| Displacement / Length | 73 | 338 |
| Comfort ratio | 37.0 | 42.7 |
| Capsize screening | 1.81 | 1.65 |
| Hull speed (kn) | 13.9 | 7.5 |
Swan 115 vs Swan 43: the short version
- The Swan 115 is the larger boat at 107.7 ft32.84 m LOA versus 31.0 ft9.45 m for the Swan 43.
- The Swan 115 is heavier, displacing about 805% more, which usually means a steadier but slower-to-accelerate hull.
- On sail area/displacement the Swan 115 carries the more powerful rig (32.4 vs 16.5), favouring lighter-air performance.
- The Swan 43 scores higher on the Brewer comfort ratio, suggesting an easier motion in a seaway.
- By the capsize screening formula the Swan 43 rates better for offshore work (1.65 vs 1.81).
Ratios are guidelines computed from published specs; condition, layout and gear matter as much as the numbers.