Capri 16
Catalina Yachts · designed by Frank W. Butler · 1987
wing keelBermuda rigUnited States
The Capri 16 is a 17-foot bermuda rig sailboat designed by Frank W. Butler and built by Catalina Yachts, first launched in 1987.
General
| Builder | Catalina Yachts |
|---|---|
| Designer | Frank W. Butler |
| Years built | 1987 |
| Hull type | wing keel |
| Rig type | Bermuda rig |
| Construction | fiberglass |
| Origin | United States |
Dimensions
| LOA | 16.50 ft5.03 m |
|---|---|
| LWL | 15.50 ft4.72 m |
| Beam | 6.92 ft2.11 m |
| Draft (max) | 2.42 ft0.74 m |
| Displacement | 1,350 lb612 kg |
| Ballast | 425 lb193 kg |
| Sail Area | 138 ft²12.8 m² |
Design ratios
Computed from the specs above using the standard formulas. Try the sailboat calculators with your own numbers.
SA / Displacement 18.08 Cruiser — good all-round performance
Ballast / Displacement 31.5 % Higher = stiffer / more sail-carrying power
Displacement / Length 162 Light
Comfort Ratio 10.0 Racing / light coastal
Capsize Screening 2.50 Better suited to coastal use (> 2.0)
Hull Speed 5.3 kn Theoretical max displacement speed
How these numbers are calculated
- SA / Displacement
SA ÷ (Disp ÷ 64)^(2/3)— Power-to-weight. < 16 under-canvassed, 16–20 cruiser, > 20 racer.- Ballast / Displacement
Ballast ÷ Disp × 100— Stability/stiffness. Higher carries sail better.- Displacement / Length
Disp(lt) ÷ (0.01 · LWL)³— < 100 ultralight, 100–200 light, 200–300 moderate, > 300 heavy.- Comfort Ratio (Brewer)
Disp ÷ (0.65 · (0.7·LWL + 0.3·LOA) · Beam^1.33)— Motion in a seaway. Higher = more comfortable offshore.- Capsize Screening
Beam ÷ (Disp ÷ 64)^(1/3)— ≤ 2.0 favored for offshore; > 2.0 better for coastal use.- Hull Speed
1.34 · √LWL— Theoretical max displacement speed in knots.
Estimated price
$8,000 typical range $6,500 – $9,500
⚠ Rough estimate only — not market data. Derived from a simple model based on length and hull age; actual asking prices vary widely with condition, equipment, engine hours and location.
