Etap 32i
Etap Yachting · designed by Harlé-Mortain · 1992
fin keelBermuda rigBelgium
The Etap 32i is a 31-foot bermuda rig sailboat designed by Harlé-Mortain and built by Etap Yachting, first launched in 1992.
General
| Builder | Etap Yachting |
|---|---|
| Designer | Harlé-Mortain |
| Years built | 1992 |
| Hull type | fin keel |
| Rig type | Bermuda rig |
| Construction | — |
| Origin | Belgium |
Dimensions
| LOA | 30.67 ft9.35 m |
|---|---|
| LWL | 26.25 ft8.00 m |
| Beam | 11.22 ft3.42 m |
| Draft (max) | 4.60 ft1.40 m |
| Displacement | 9,763 lb4,428 kg |
| Ballast | 2,866 lb1,300 kg |
| Sail Area | 588 ft²54.6 m² |
Design ratios
Computed from the specs above using the standard formulas. Try the sailboat calculators with your own numbers.
SA / Displacement 20.60 Performance / racer — powered up
Ballast / Displacement 29.4 % Higher = stiffer / more sail-carrying power
Displacement / Length 241 Moderate
Comfort Ratio 21.9 Coastal cruiser
Capsize Screening 2.10 Better suited to coastal use (> 2.0)
Hull Speed 6.9 kn Theoretical max displacement speed
How these numbers are calculated
- SA / Displacement
SA ÷ (Disp ÷ 64)^(2/3)— Power-to-weight. < 16 under-canvassed, 16–20 cruiser, > 20 racer.- Ballast / Displacement
Ballast ÷ Disp × 100— Stability/stiffness. Higher carries sail better.- Displacement / Length
Disp(lt) ÷ (0.01 · LWL)³— < 100 ultralight, 100–200 light, 200–300 moderate, > 300 heavy.- Comfort Ratio (Brewer)
Disp ÷ (0.65 · (0.7·LWL + 0.3·LOA) · Beam^1.33)— Motion in a seaway. Higher = more comfortable offshore.- Capsize Screening
Beam ÷ (Disp ÷ 64)^(1/3)— ≤ 2.0 favored for offshore; > 2.0 better for coastal use.- Hull Speed
1.34 · √LWL— Theoretical max displacement speed in knots.
Estimated price
$29,500 typical range $23,500 – $35,500
⚠ Rough estimate only — not market data. Derived from a simple model based on length and hull age; actual asking prices vary widely with condition, equipment, engine hours and location.