Bremer 25
CW Hood Yachts/Bremer Marine · designed by Mark Bremer · 1995
lifting keelBermuda rigUnited States
The Bremer 25 is a 25-foot bermuda rig sailboat designed by Mark Bremer and built by CW Hood Yachts/Bremer Marine, first launched in 1995.
General
| Builder | CW Hood Yachts/Bremer Marine |
|---|---|
| Designer | Mark Bremer |
| Years built | 1995 |
| Hull type | lifting keel |
| Rig type | Bermuda rig |
| Construction | fiberglass |
| Origin | United States |
Dimensions
| LOA | 25.00 ft7.62 m |
|---|---|
| LWL | 22.50 ft6.86 m |
| Beam | 8.00 ft2.44 m |
| Draft (max) | 6.16 ft1.88 m |
| Displacement | 3,800 lb1,724 kg |
| Ballast | 1,600 lb726 kg |
| Sail Area | 310 ft²28.8 m² |
Design ratios
Computed from the specs above using the standard formulas. Try the sailboat calculators with your own numbers.
SA / Displacement 20.37 Performance / racer — powered up
Ballast / Displacement 42.1 % Higher = stiffer / more sail-carrying power
Displacement / Length 149 Light
Comfort Ratio 15.8 Racing / light coastal
Capsize Screening 2.05 Better suited to coastal use (> 2.0)
Hull Speed 6.4 kn Theoretical max displacement speed
How these numbers are calculated
- SA / Displacement
SA ÷ (Disp ÷ 64)^(2/3)— Power-to-weight. < 16 under-canvassed, 16–20 cruiser, > 20 racer.- Ballast / Displacement
Ballast ÷ Disp × 100— Stability/stiffness. Higher carries sail better.- Displacement / Length
Disp(lt) ÷ (0.01 · LWL)³— < 100 ultralight, 100–200 light, 200–300 moderate, > 300 heavy.- Comfort Ratio (Brewer)
Disp ÷ (0.65 · (0.7·LWL + 0.3·LOA) · Beam^1.33)— Motion in a seaway. Higher = more comfortable offshore.- Capsize Screening
Beam ÷ (Disp ÷ 64)^(1/3)— ≤ 2.0 favored for offshore; > 2.0 better for coastal use.- Hull Speed
1.34 · √LWL— Theoretical max displacement speed in knots.
Estimated price
$20,500 typical range $16,500 – $24,500
⚠ Rough estimate only — not market data. Derived from a simple model based on length and hull age; actual asking prices vary widely with condition, equipment, engine hours and location.
